Walk In Stability Chamber

Stability Chamber / Walk In Stability Chamber (Regular – GMP – Model)

Description

 

  • Designed for testing product shelf – life, packing and electronic test.
  • Specially designed to meet ICH, WHO & USFDA requirements.
  • Double walled having Inner 304 SS chamber and Exterior finished in Powder Coated Shade in REGULAR MODEL.
  • Inner SS 304/SS 316 and Exterior  SS  304  matt/buff  finish  in  GMP
  • The Temp. & Humidity controlled by Microprocessor based PID Temp. & RH% Controller with Dual Digital Indicator & PT – 100 sensor for Temp. & capitence type sensor for RH%.
  • A perfectly designed CFC Free cooling system to operate any temperature from 10°C to 60°C.
  • Temperature Accuracy :- Within ± 1°C.
  • Cooling Kit is CFC Free. The Cooling Kit includes hermetically sealed compressor, condenser, Fan Motor, and are safely placed below/above the chamber.
  • Humidification through steam injection system. Humidity levels from 40% RH to 95% RH & depends on Temperature i.e. lower temp. lower humidity higher the temp. higher humidity.
  • Humidity Stability :- 2% RH to ± 3% RH
  • Air Circulation system ensures more stability of condition & even distribution inside the chamber.
  • A Boiler Tank consisting of Water Heater having auto cut off facility with Audio Alarm for low water level.
  • Reservoir Water Tank having float Valve provided.
  • Overload protection relay & time delay for compressor.
  • Shelves are SS wire mesh/SS rod type 3 Nos with all units as standard.
  • Atwo pan glass window provided on door for clear observation of An ancillary type heater provided in between the glass to cut the condensation.
  • The illumination is provided through fluorescent tubes for clear visibility of test.

 

CAT NO. CHAMBER SIZE

W x D x Ht.

CAPACITY
LTRS CFT
CIC – 64 18” x 18” x 28” 150 Ltrs 5.25 CFT
CIC – 64 20” x 20” x 34” 225 Ltrs 8 CFT
CIC – 64 24” x 24” x 36” 342 Ltrs 12 CFT
CIC – 64 26” x 26” x 36” 400 Ltrs 14 CFT
CIC – 64 36” x 36” x 40” 850 Ltrs 30 CFT

 

OPTIONAL

PRINTER OUTPUT facility required to record PV, SV, Actual Date/Time with variable print time interval, 5000 line memory & Audio alarm facility in case of memory full.

TEMP. SCANNER 4 Channel/8 Channel with Printer Output facility to record temp. & RH at various places inside chamber.

TOUCH SCREEN HMI facility.

AUTO CHANGE OVER to stand by Cooling System.

GSM mobile alert.

21 CFR PART 11 COMPLIANCE SOFTWARE for Data Management.

ALARM HOOTER facility.

NOTE: We reserve the right to change the Specifications, Outer Size and Design of equipment without prior notice due to constant equipment upgradation.

Reviews

There are no reviews yet.

Be the first to review “Walk In Stability Chamber”

Your email address will not be published. Required fields are marked *

Post comment