Photo Stability Test Chamber

PHOTO STABILITY TEST CHAMBER

Description

 Name of Equipment LABTOP® Micro controller (PID) based Photo Stability Chamber
    Air Circulation Chamber blowers to have uniformity of temperature under loaded Condition
    Alarm Audio Visual Alarm if the temperature deviates from the set Temperature
    Trays Stainless Steel perforated trays.
    Lighting Interior illumination for working area
    Insulation 3” Thick CFC free PUF Insulation.
    Heating System U shaped S.S. Nichrome wire air heaters
    Observation Door Inside see through unbreakable acrylic door
    Refrigeration System Hermetically Sealed CFC Free Emerson Compressor with R- 134a refrigerant having state of art by pass system for continues run of compressor
    Humidity System Non condensing type steam injection system with water level arrangement with insulation to save heat energy.
    Control System Precise control of temperature and humidity by using CE Approved micro controller based PID controller (Auto tuning type)
    Validation Port 50 mm validation Port with silicon rubber seal to insert sensors for validation purpose
    Power Works on 230 V AC single phase 50Hz
    Other Castor wheels, MCB, Adjustable Tray Height arrangement. Heavy duty latch with lock & key.
    Safety Features 1. Float switch to cutoff the mains supply in case of low water level in the boiler tank 2. Additional safety thermostat to cut off the boiler system in case of overshoot of temperature 3. 180 Sec. compressor ‘ON’ delay timer to safe guard the compressor.
    Certifications ISO 9001: 2008 , ISO 13485 : 2012 and CE
    Documentations LABTOP will provide IQ, OQ, PQ documents with Material Test Certificates and Calibration reports

SPECIFICATION

Temperature Range 20 to 60° C
Temperature Accuracy ± 0.2° C
Temperature Uniformity ± 2° C
Humidity Range 40% RH to 98% RH
Humidity Accuracy ± 2% RH.
Humidity Uniformity ± 3% RH.
Photo Stability Effect Fluorescent tubes for day light effect and U.V. tubes for ultra-violet rays in accordance to ICH guidelines requirement of lightning Energy
Timer 99 Hrs Programmable Micro Controller Based Cyclic Timer for regulating illumination condition

Standard Models: Inner Stainless steel 304, 0.8 mm & Outer mild steel,1.0 mm powder coated

Catalogue Numbers Capacity In liters Internal Size in (WxDxH) cms External Size in(WxDxH) cms No. of Doors No. of trays
LPC- 100 100 43x40x60 58x72x129 Single 2
LPC- 200 200 50x40x100 65x72x169 Single 3
LPC- 300 300 56x45x120 71x77x189 Single 4
LPC- 400 400 63x53x120 78x85x189 Single 4
LPC-600 600 72x65x130 87x97x192 Single 4

GMP Models: Inner Stainless steel 316, 0.8 mm & Outer Stainless steel,1.0 mm

Catalogue Numbers Capacity In liters Internal Size in (WxDxH) cms External Size in(WxDxH) cms No. of Doors No. of trays
LPC- 100 100G 43x40x60 58x72x129 Single 2
LPC- 200 200G 50x40x100 65x72x169 Single 3
LPC- 300 300G 56x45x120 71x77x189 Single 4
LPC- 400 400G 63x53x120 78x85x189 Single 4
LPC-600 600G 72x65x130 87x97x192 Single 4

OPTIONAL ACCESSORIES

SC-10 Dedicated Safety system to shut off the air heater in case of over shoot of Temperature, giving audio visual alarm.
PCI-2 PC Interface communication card with RS – 485 for temperature And humidity control system (Hardware for each chamber)
DB-100 Data Bank to record, store and Print set values, process values, Date & time of master controllers with variable print time intervals.
DS-44 4 point temperature and 4 point humidity scanner complete with sensors printer interface and facility to record, store and Print process values, Date & time with variable print time intervals.
DS-88 8 channel temperature and 8 channel humidity scanner complete with sensors printer interface and facility to record, store and Print process values, Date & time with variable print time intervals.
LW-21 “LABTOPWARE” CFR 21 Part 11 compliance Windows based communication software for data management. Complete with RS-485 multi dropping to monitor multiple chambers to one software
SR-100 Ready to use stand by refrigeration system in case of regular system fails. Complete with compressor condenser, evaporator and other accessories with gas charging.(Above 600 Liters)
SH-1 Ready to use stand by Humidity System in case of regular system fails.
AT-1 Additional tray suitable for above equipment
GSM-5 Mobile alert via GSM Technology in case of system failure
PLC-20 Programmable Logic controller (PLC) with built in PID controller ( Auto tune type), data storage, Safety controller, auto changeover of Standby systems & other event Managements and Ethernet connectivity with 3.8” HMI with color touch screen
BB-8 Online uninterrupted power supply for PLC
DV- 8 Validation charges per day (8 hrs)

Reviews

There are no reviews yet.

Be the first to review “Photo Stability Test Chamber”

Your email address will not be published. Required fields are marked *

Post comment